View FVXO-PC53_426240.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Model: FVXO-PC53 SERIES
LVPECL 5 x 3.2mm 3.3V V C X O
Features
XTREMELY Low Jitter Low Cost XPRESS Delivery Frequency Resolution to six decimal places Absolute Pull Range (APR) of 50ppm -20 to +70C or -40 to +85C operating temperatures www..com Tri-State Enable / Disable Feature Industry Standard Package, Footprint & Pin-Out Fully RoHS compliant Gold over Nickel Termination Finish Serial ID with Comprehensive Traceability
VC V DD Enable / Disable
Freq: 0.75 MHz to 1.35GHz
Rev. 12/12/2007
Applications
* * * * * * * * * ANY application requiring an oscillator SONET Ethernet Storage Area Network Broadband Access Microprocessors / DSP / FPGA Industrial Controllers Test and Measurement Equipment Fiber Channel
Frequency Control Circuit
X PRESSO
ASICs
GND
FOX
OUTPUT
For more information -- Click on the drawing
Contents
page
Description
The Fox XPRESSO Crystal Oscillator is a breakthrough in configurable Frequency Control Solutions. XPRESSO utilizes a family of proprietary ASICs, designed and developed by Fox, with a key focus on noise reduction technologies. The 3rd order Delta Sigma Modulator reduces noise to the levels that are comparable to traditional Bulk Quartz and SAW oscillators. The ASICs family has ability to select the output type, input voltages, and temperature performance features. With the XPRESS lead-time, low cost, low noise, wide frequency range, excellent ambient performance, XpressO is an excellent choice over the conventional technologies. Finished XPRESSO parts are 100% final tested.
Model Selection & Part Number Guide 2 Electrical Characteristic 3 Absolute Maximums 3 Output Wave Characteristics 4 Phase Noise 5 Jitter 5 Pin Assignment 6 Recommended Circuit 6 Reflow 6 Mechanical Drawing and Pad Layout 7 Tape and Reel Specification 8 Label 8 Traceability - LOT Number & Serial Identification 9 RoHS Material Declaration 10 SGS Report 11 & 12 Mechanical Test 13 Burn-In Test 13 MTTF / FITS calculations 14 15 Other XPRESSO Links Fox Contact Information 15
Page 1 of 15
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282 Taiwan Tel: +886.2.22073427 Fax +886.2.22073486 | Japan Tel: +81.3.3374.2079 Fax: +81.3.3374.5221 (c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series Model Selection Guide & Fox Part Number
STEP #1: Customer selects the Model Description and provides to Fox Customer Service Model Description
FVXO - P C 5 3 B R - 644.53125
Frequency (in MHz)
Resolutions to 6 places past the decimal point
www..com
C = Ceramic H = HCMOS Q = Quartz L = LVDS P = LVPECL X = HCMOS (comp 2nd Output)
5 = 5 x 3.2mm 7 = 7 x 5mm
3 = 3.3 V 2 = 2.5 V
R = -40C to +85C B = 50-ppm Absolute Pull Range
blank = -20C to +70C
STEP #2: The Fox Customer Service team provides a customer specific Part Number
for use on their Bill Of Materials (BOM).
Fox Part Number
The 1st Field
Product Code # 793 = FVXO-HC5 792 = FVXO-HC7 797 = FVXO-LC5 794 = FVXO-LC7 795 = FVXO-PC5 796 = FVXO-PC7
(The assigned Fox Part Number must be on the BOM - not the above Model Description) (This will ensure receipt of the proper part)
7 9 5 - 644.53125 - 1
The 3rd Field
Fox Internally Generated Number
nd
The 2
Field
The Customer's Frequency
(If any specification changes, the last digits change) (The same specs for a different customer also changes the last digits)
This example, FVXO-PC53BR-644.53125 = Voltage Controlled, LVPECL Output, Ceramic, 5 x 3.2mm Package, 3.3V, 50 PPM Absolute Pull Range, -40 to +85C Temperature Range, at 644.53125 MHz
Absolute Maximum Ratings (Useful life may be impaired.
Parameters
Input Voltage Operating Temperature Storage Temperature Junction Temperature ESD Sensitivity
For user guidelines only, not tested)
Symbol
VDD TAMAX TSTG HBM
Condition
Maximum Value
(unless otherwise noted)
Human Body Model
-0.5V to +5.0V -55C to +105C -55C to +125C 150C 1 kV
Page 2 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
Electrical Characteristics
Parameters
Frequency Range Absolute Pull Range Note 1 Temperature Range Supply Voltage Input Current (@ Standard Load) www..com Output Load Start-Up Time Output Enable / Disable Time Moisture Sensitivity Level Termination Finish TSTG VDD IDD TS MSL JEDEC J-STD-20
Symbol
FO APR TO
Condition
Maximum Value
(unless otherwise noted)
Standard operating Optional operating Storage Standard Standard Load Standard
0.750 MHz to 1.35 GHz 50 ppm MIN -20C to +70C -40C to +85C -55C to +125C 3.3 V 5% 120 mA 50 Ohms into VDD-2VDC. TYP. 10 mS 100 nS 1 Au
Note 1 - Inclusive of 25C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration.
Frequency Control (VC) Input -Parameters
Control Voltage Tuning Slope 2 Control Voltage Linearity Control Voltage Tuning Range Modulation Bandwidth Nominal Control Voltage
1
pin # 1
Symbol
LVC VC BW VCNOM
Condition
0V to VDD
Maximum Value
(unless otherwise noted)
40 ~ 75 ppm/V Typ 10% 0V ~ 3.3V 10 kHz 1.65V
2
NOTES:
1 2
Actual slope is affected by frequency and accuracy settings. For an example of linearity, see the graph below. (The middle line represents the default Fox factory setting)
FVXO Oscillator Pull
@ 25C -- (range of typical responses)
Range of possible Tuning Slopes - depending on frequency and stability
150.0 100.0 Pull From Vc=1.65V (PPM)
50.0 0.0 -50.0
-100.0 -150.0 0.00 0.30 0.60 0.90 1.20 1.50 1.80 2.10 2.40 2.70 3.00 3.30
Vc = Voltage Applied to Pin # 1
Page 3 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
Output Wave Characteristics
Parameters
Low Output Voltage High Output Voltage Typical Complementary Difference Output Symmetry (See Drawing Below) Output Enable (PIN # 2) Voltage www..com Output Disable (PIN # 2) Voltage Cycle Rise Time (See Drawing Below) Cycle Fall Time (See Drawing Below)
Symbol
VOL VOH VP-P VIH VIL TR TF
Condition
0.75 MHz to 1.35 GHz 0.75 MHz to 1.35 GHz 0.75 MHz to 1.35 GHz @ 50% VP-P Level
Maximum Value
(unless otherwise noted)
0.75 MHz to 1.35 GHz 0.75 MHz to 1.35 GHz
1.305V ~ 1.65V 2.055V ~ 2.405V 0.750 VP-P Typ 45% ~ 55% > 70% VDD < 30% VDD 400 pS (20%~80%) 400 pS (80%~20%)
Rise Time / Fall Time Measurements TR OUTPUT 2 TF
2.055V ~ 2.405V
20% to 80%
OUTPUT 1
1.305V ~ 1.65V
Oscillator Symmetry
Ideally, Symmetry should be 50/50 for 1/2 period -- Other expressions are 45/55 or 55/45
OUTPUT 2
2.055V ~ 2.405V
50% VDD
OUTPUT 1
1/2 Period Period
1.305V ~ 1.65V
Page 4 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
Phase Noise
0 dBc -10dBc -20dBc -30dBc -40dBc -50dBc
212.5 MHz 622.08 MHz
Phase Noise Graph
(dBc / Hz) vs. offset frequency
FOUR frequencies matching the below jitter measurements
-60dBc
www..com -70dBc
Data Collected using HP 3048A
-80dBc
62.5 MHz
-90dBc -100dBc -110dBc -120dBc -130dBc
62.5 MHz 156.25MHz
-140dBc -150dBc -160dBc
622.08 MHz 156.25MHz 212.5 MHz
10
100
1k
10k
100k
1M
10M
40M
Offset Frequency
(10Hz to 40MHz)
Jitter is frequency dependent. Below are typical values at select frequencies.
LVPECL Phase Jitter & Time Interval Error (TIE)
Frequency
62.5 MHz 156.25 MHz 212.5 MHz 622.08MHz
Phase Jitter
(12kHz to 20MHz)
TIE
(Sigma of Jitter Distribution)
Units
pS RMS pS RMS pS RMS pS RMS
1.01 0.86 1.05 0.94
3.1 3.5 3.6 3.5
Phase Jitter is integrated from HP3048 Phase Noise Measurement System; measured directly into 50 ohm input; VDD = 3.3V. TIE was measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software; VDD = 3.3V.
Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications)
LVPECL Random & Deterministic Jitter Composition
Frequency
62.5 MHz 156.25 MHz 212.5 MHz 622.08 MHz
Random (Rj)
(pS RMS)
Deterministic (Dj)
(pS P-P)
Total Jitter (Tj)
(14 x Rj) + Dj 26.2 pS 27.7 pS 26.1 pS 26.8 pS
1.27 1.29 1.22 1.21
8.1 9.3 8.6 9.6
Rj and Dj, measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software.
Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications) Page 5 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series Pin Description and Recommended Circuit
Pin #
1 2 3 4 5 6
Name
VC E/D GND Output Output 2 VDD
1 2
Type
1
Function
Frequency Control by changing voltage Enable / Disable Control of Output (0 = Disabled) Electrical Ground for VDD LVPECL Oscillator Output Complementary LVPECL Output Power Supply Source Voltage
2
Control Logic Ground Output Output Power
NOTES:
www..com
Includes pull-up resistor to VDD to provide output when the pin (2)is No Connect. Installation should include a 0.01F bypass capacitor placed between VDD (Pin 6)and GND (Pin 3) to minimize power supply line noise.
VC 1 E/D 2 GND 3
6 VDD
VC
0.01 F #1 #2 GND #3 #6 #5 #4 50 VDD -2V = +1.3V
VDD +3.3V LVPECL OUTPUT2 LVPECL OUTPUT 50
5 Output 2 4 Output
E/D
Terminations as viewed from the Top
0.01 F
Enable / Disable Control
Pin # 2 (state)
OPEN (No Connection) "1" Level VIH > 70% VDD "0" Level VIL < 30% VDD
Output (Pin # 4, Pin # 5)
ACTIVE Output ACTIVE Output High Impedance
Soldering Reflow Profile
260C 225C 180C
(2 times Maximum at 260C for 10 seconds MAX)
tp Ramp-Up 3C/s Max
5010 Seconds Above 225C Reflow Area
10 Seconds Max within 5C of 260C peak
Ramp Down Not to exceed 6C/s
160C
120 20 Seconds In Pre-heating Area
25C 400 Seconds MAX from +25C to 260C peak
Page 6 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
Mechanical Dimensional Drawing & Pad Layout
5.15 Max
#6 #5 #4
TOP VIEW
X PRESS O
#1 #2 #3
3.35 Max
Actual part marking is depicted.
See Traceability (pg. 9) for more information
www..com
0.5 1.4 Max
2.54
1.27
#1 #6 #2 #5 #3 #4
1.2
0.64
Recommended Solder Pad Layout
2.54 0.8 1.29 2.25
1.27 1.24
Note: XPRESSO LVDS XOs are designed to fit on Industry standard, 6 pad, layouts.
Pin Connections #4) Output #1) VC #2) E/D #5) Output 2 #3) GND #6) VDD
Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Page 7 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
Tape and Reel Dimensions
4.0mm O1.5mm
7.5mm 5.5mm 16mm 12mm
www..com
2.15mm
8.0mm
1k Reel Dimensions in mm
2.0
2k Reel Dimensions in mm
2.0 120
O13.0
O21.0 178.0 2.0 62.0
O13.0 2.0 2.0
O21.0 255.0 80.0
17.5 17.5
Labeling
(Reels and smaller packaging are labeled with the below)
* Fox Part Number: 795-644.53125-1 * Quantity: 2000 pieces
795-644.53125-1
* Description: FVXO-PC53BR-644.53125 * Date Code
*
FVXO-PC53BR-644.53125
0745 24435
(YYWW 2007 45 wk)
th
LOT #
If traceability should become necessary
An additional identification code is contained internally if tracking should ever be necessary
Page 8 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
Traceability - LOT Number & Serial Identification
LOT Number
The LOT Number has direct ties to the customer purchase order. The LOT Number is marked on the "Reel" label, and also stored internally on non-volatile memory inside the XPRESSO part. XPRESSO parts that are shipped Tape and Reel, are also placed in an Electro Static Discharge (ESD) bag and will have the LOT Number labeled on the exterior of the ESD bag. It is recommended that the XPRESSO parts remain in this ESD bag during storage for protection and
www..com identification.
If the parts become separated from the label showing the LOT Number, it can be retrieved from inside one of the parts, and the information that can be obtained is listed below: * * * * * Customer Purchase Order Number Internal Fox Sales Order Number Dates that the XPRESSO part was shipped from the factory The assigned customer part number The specification that the part was designed for
Serial Identification
The Serial ID is the individualized information about the configuration of that particular XPRESSO part. The Serial ID is unique for each and every XPRESSO part, and can be read by special Fox equipment. With the Serial ID, the below information can be obtained about that individual, XPRESSO part: * * * * * * * Equipment that the XPRESSO part was configured on Raw material used to configure the XPRESSO part Traceability of the raw material back to the foundries manufacturing lot Date and Time that the part was configured Any optimized electrical parameters based on customer specifications Electrical testing of the actual completed part Human resource that was monitoring the configuration of the part
Fox has equipment placed at key Fox locations World Wide to read the Lot Identification and Serial Number of any XPRESSO part produced and can then obtain the information from above within 24 hours
Page 9 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
RoHS Material Declaration
Material Name Cover Kovar
Component Nickel (Ni) Cobalt (Co) Iron (Fe)
Content (mg) 1.890 1.113 3.540 35.484 1.733 0.268 0.364 0.234 0.253 6.290 0.195 0.810 0.203 0.281 2.438 1.309 0.768 1.191 0.210 0.0021 0.950 0.480 0.000210 0.0000700 1.170 0.019 0.000159 0.00037 0.000125 61.196
Content 3.09% 1.82% 5.78% 57.98% 2.83% 0.44% 0.59% 0.38% 0.41% 10.28% 0.32% 1.32% 0.33% 0.46% 3.98% 2.14% 1.25% 1.95% 0.34% 0.00343% 1.55% 0.784% 0.000343% 0.0001144% 1.91% 0.0310% 0.000260% 0.000605% 0.000204% 100.00%
(CAS Number) 7440-02-0 7440-48-4 7439-89-6 1344-28-1 14808-60-7 1308-38-9 18868-43-4 1309-48-4 1305-78-8 7440-33-7 7439-98-7 7440-02-0 7440-48-4 7440-57-5 7439-89-6 7440-02-0 7440-48-4 7440-22-4 7440-50-8 7429-90-5 7440-21-3 7440-57-5 7440-22-4 14808-60-7 7440-22-4 7440-02-0 7440-22-4 7440-21-3
Base
www..com
Ceramic
Alumina (Al2O3) Silicon Oxide (SiO2) Chromium Oxide (Cr2O3) Molybdenum Oxide (MoO2) Magnesium Oxide (MgO) Calcium Oxide (CaO)
+ Metallization + Nickel Plating + Gold Plating Seal ring
Tungsten (W) Molybdenum (Mo) Nickel (Ni) Cobalt (Co) Gold (Au) Iron (Fe) Nickel (Ni) Cobalt (Co)
silver solder Gold Adhesive Crystal Crystal Electrode Adhesive TOTAL
Silver (Ag) Copper (Cu) Aluminum (Al) Silicon (Si) Gold (Au) Silver (Ag) Epoxy Silicon Dioxide (SiO2) Silver (Ag) Nickel (Ni) Silver (Ag) Silicon (Si)
Page 10 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
3rd Party (SGS) Material Report
www..com
Page 11 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
3rd Party (SGS) Material Report (continued)
www..com
Page 12 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
Mechanical Testing
Parameter
Mechanical Shock Mechanical Vibration
www..com
Test Method
Drop from 75cm to hardwood surface - 3 times 10~55Hz, 1.5mm amplitude, 1 Minute Sweep 2 Hours each in 3 Directions (X, Y, Z) Under Power @ 125C for 2000 Hours (results below) He pressure: 4 1 kgf / cm2 2 Hour soak
High Temperature Burn-in Hermetic Seal
2,000 Hour Burn-In Burn-In Testing - under power 2000 Hours, 125C
XpressO LVPECL Burn-In
Freq = 10MH VD = 3.3V; Ta = 125C; N = 120 z; D 15 10 5 0 -5 -10 -15 -20
Drift (PPM
Initial
250 hours 500 hours
1000 hours
2000 hours
Page 13 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series
MTTF / FITS Calculations
Products are grouped together by process for MTTF calculations. (All XpressO output and package types are manufactured with the same process) Number of Parts Tested: 360 (120 of each output type: HCMOS, LVDS, LVPECL) Number of Failures: 0 Test Temperature: 125C Number of Hours: 2000
www..com
MTTF was calculated using the following formulas: [1.] Device Hours (devhrs) = (number of devices) x (hours at elevated temperature in K)
[2.] MTTF = [3.] FITS = Where: Label af eV k t1 t2 r 2
devhrs x af x 2
2
* 109
1 MTTF
Name
Acceleration Factor Activation Energy Bolzman's Constant
Formula/Value eV 11 ( )x( - ) k t1 t2
e
0.40 V 8.62 X 10-5 eV/K Operating Temperature (K) Accelerated Temperature (K)
Theta Failures Chi-Square
Confidence Level (60% industry standard) Number of failed devices statistical significance for bivariate tabular analysis [table lookup] based on assumed (Theta - confidence) and number of failures (r) For zero failures (60% Confidence): 2 = 1.830
DEVICE-HOURS = 360 x 2000 HOURS = 720,000
( 1 1 0.40 ) )x( - 298 398 = 49.91009 8.625
ACCELERATION FACTOR =
e
MTTF = 720,000 x 49.91009 x 2 = 15,607,065 Hours
1.833
1.833 = 6.41E-8 720,000 x 49.91009 x 2
Failure Rate =
FITS = Failure Rate *1E9 = 64
Page 14 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified
FVXO-PC53 Series Notes : Other XPRESSO Links
XPRESSO Brochure Crystal Oscillators HCMOS 5 x 3.2mm 3.3V XO 0.75 to 250MHz HCMOS 7 x 5mm 3.3V XO 0.75 to 250MHz LVPECL 5 x 3.2mm 3.3V XO 0.75 to 1.35GHz LVPECL 7 x 5mm 3.3V XO 0.75 to 1.35GHz
www..com
LVDS 5 x 3.2mm 3.3V XO 0.75 to 1.35GHz LVDS 7 x 5mm 3.3V XO 0.75 to 1.35GHz Voltage Controlled Crystal Oscillators HCMOS 5 x 3.2mm 3.3V VCXO 0.75 to 250MHz HCMOS 7 x 5mm 3.3V VCXO 0.75 to 250MHz LVPECL 5 x 3.2mm 3.3V VCXO 0.75 to 1.35GHz LVPECL 7 x 5mm 3.3V VCXO 0.75 to 1.35GHz LVDS 5 x 3.2mm 3.3V VCXO 0.75 to 1.35GHz LVDS 7 x 5mm 3.3V VCXO 0.75 to 1.35GHz Main Website www.foxonline.com
Patent Numbers: US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290; Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652 China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179 US and Foreign Patents Pending XpressOTM Fox Electronics Contact Information (USA)-Worldwide Headquarters Tel: 888-GET-2-FOX Outside US: +1.239.693.0099, Fax:+1.239.693.1554 Email: www.foxonline.com/email.htm Fox EMEA Tel/Fax: +44.1767.312632 Email: www.foxonline.com/email.htm Fox Taiwan Tel:+886-2-22073427, Fax:+886-2-22073486 Fox Hong Kong Tel: +852.2854.4285, Fax:+852.2854.4282 Email: www.foxonline.com/email.htm Fox Japan Tel:+81.3.3374.2079, Fax: +81.3.3377.5221 Email: www.foxonline.com/email.htm
Email: www.foxonline.com/email.htm The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Page 15 of 15
(c) 2008 FOX ELECTRONICS | ISO9001:2000 Certified

▲Up To Search▲

Price & Availability of FVXO-PC53

	To Download FVXO-PC53 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .